다양한 NETGEAR 제품의 네트워크 관리를 위한 소프트웨어 애플리케이션
다양한 NETGEAR 제품의 네트워크 관리를 위한 소프트웨어 애플리케이션
1 / 4
특징
네트워크 운영을 제어하고 최적화하는 데 필요한 인프라 인사이트를 확보하십시오
NETGEAR의 ProSAFE® 네트워크 관리 시스템 NMS300은 네트워크를 구성, 관리 및 진단할 수 있도록 인사이트와 제어 기능을 제공하여, 데이터와 서비스를 시기적절하고 안정적이며 비용 효율적인 방식으로 제공하도록 보장합니다. 사용이 쉽고, 사전 대응적이며, 안전한 ProSAFE® NMS300은 복잡한 이기종 데이터 네트워크를 모니터링하고 제어하는 데 필요한 네트워크 관리 작업을 간소화합니다. NMS300을 사용하면 모든 관리형 NETGEAR 제품을 한 번에 등록하는 것도 한 번의 클릭으로 해결됩니다. 지금 바로 NMS300을 다운로드하십시오.
ProSAFE® NMS300은 업계 표준인 SNMP(Simple Network Management Protocol)를 사용하는 모든 관리형 장치(레이어 2 스위치, 모든 브랜드의 레이어 3 스위치, 무선 액세스 포인트, 일반 라우터, 서버, 프린터 등)와 함께 작동합니다. 이 솔루션은 이기종 네트워크에서 최대 200개 장치를 자동으로 검색하고 맵으로 표시하며, 이에 따른 추가 비용은 없습니다. NMS300은 최대 200개 장치까지 무료이며, 무선 컨트롤러에 연결된 관리형 액세스 포인트는 장치 수에 포함되지도 않습니다. 캠퍼스 네트워크를 위한 합리적인 가격의 추가 200대 장치 라이선스 팩도 제공됩니다. 네트워크 통계는 실시간 그래프로 확인하거나, 히스토리 데이터로 저장하여 추세 분석에 활용할 수 있습니다. 이메일 알림을 포함한 사전 임계값 및 경고 기능을 통해 병목 현상 및 기타 네트워크 문제를 감지하여 사용자가 문의하기 전에 문제를 알려 줍니다. 사용이 간편한 웹 그래픽 인터페이스를 통해 네트워크 내 어디에서나 네트워크 요소부터 사용자 및 장치 그룹까지 모든 것을 모니터링할 수 있습니다.
NETGEAR 관리형 네트워크 제품에 최적화된 NMS300은 다음과 같은 독점 기능을 제공합니다:
사용이 간편하고 확장 가능한 관리 플랫폼
200대 장치 라이선스가 내장된 무료 다운로드
다중 벤더 및 타사 SNMP 모니터링
펌웨어 중앙 업그레이드 및 대량 구성
구성 파일 백업, 관리 및 복원
새로운 기능으로는 sFlow 컬렉션 서버, 트래픽 또는 패킷 손실이 임계값을 초과할 때 토폴로지 맵 경고, SNMP 설정 구성이 가능한 포괄적인 MIB 브라우저 등이 포함됩니다.
기술 사양
보증: | 이 제품에는 최대 90일 NETGEAR 제한 하드웨어 보증이 제공됩니다. |
| 익일(영업일 기준) 하드웨어 교체가 제공됩니다. 보장 범위, 제공 가능 여부 및 약관은 여기를 클릭하여 확인하십시오. |
지원: | 90일 동안 전화를 통한 ProSUPPORT 연중무휴(24x7) 고급 기술 지원이 제공됩니다(기술 문제를 신속하게 해결할 수 있도록 기술 전문가가 원격 진단을 수행). ProSUPPORT 보장은 1년, 3년 또는 5년 계약을 구매하여 연장할 수 있습니다. |
| 채팅을 통한 ProSUPPORT 평생 연중무휴(24x7) 고급 기술 지원이 제공됩니다. |
| | 지원 |
HARDWARE AND SOFTWARE REQUIREMENTS : | |
System Architecture : | B/S-based multi-tiered system |
Standard Server Requirement (for 200 devices) : | 2.8 GHz dual-core CPU |
| 4GB RAM (32-bit OS) or 8GB RAM (64-bit OS) |
| 20GB HD (free space) |
| Static IP |
OS Support : | Microsoft Windows XP (Professional) 32-bit and 64-bit with SP3 or later |
| Windows Server 2003 (Standard, Enterprise, and Web), 32-bit and 64-bit |
| Windows Server 2008 (Enterprise), 32-bit and 64-bit |
| Microsoft Windows 7 (Professional, Enterprise, and Ultimate), 32-bit and 64-bit |
| Microsoft Windows 8 (Enterprise), 64-bit |
| Microsoft Windows Server 2012 (Standard), 64-bit |
| Microsoft Windows 10 (Home, Pro, Enterprise) 32-bit and 64-bit |
VM Support : | Support hypervisors include VMWare and other major ones such as Hyper-V and XenServer |
Installation : | Server is installed through an automated GUI-based installer |
| Single server deployment |
| Client is web based and no installation required |
TCP Port Number For Web Access : | Any unused TCP port number can be selected during NMS300 installation |
| Make sure no other service is running on selected TCP port |
| For instance, if IIS server is running (port 8080) on the same server where NMS300 is installed |
Backup and Restore : | Application system settings backup jobs can be triggered manually, or scheduled on a recurring basis |
| The application saves the system settings backup file on a specified external CIFS file server |
| The system settings backup file can be used to restore the system settings on the same server, or a new server |
Standard Client Requirement : | 2 GHz CPU |
| 2GB RAM |
| 3GB HD (free space) |
Security Profiles : | Admin: A user who can perform all functions of the application, including management of users and security profiles |
| Operator: A user who can manage the network functions, but cannot manage users or security profiles, or perform administrative tasks |
| Observer: A user who can only monitor and view network functions |
Browser Support (HTTP and HTTPS) : | Internet Explorer 9 or a later version |
| Firefox 15.0 or a later version |
| Chrome 10.0 or a later version |
Language Support : | English |
| Chinese |
Management Interface Support : | SNMP (v1, v2c, v3) |
| TFTP |
| Telnet/HTTP/HTTPS |
| Web GUI |
DISCOVERY AND REGISTRATION : | |
Automated Device Discovery : | Includes top-level, subcomponents and interfaces/ports as applicable |
Automated Link Discovery : | Ethernet link discovery with LLDP protocol |
Discovery Scheduling : | Ability to schedule discovery tasks to be executed at specified time/date(s) |
Device Resynchronization : | System resynchronization with device inventory |
Device Resynchronization Scheduling : | Ability to schedule device resynchronization to be executed at a specified time |
Device Registration : | NETGEAR managed products can be registered from NMS300 |
| The registration tool lets you register one, several, or all devices that the application manages |
| Registration occurs with the NETGEAR registration server |
| Before you can use the registration tool that the application provides, you must create a customer account at the NETGEAR product registration website |
| After you create a customer account, you can set up the account profile in NMS300 |
MONITORING : | |
Topology Mapping : | Topology views displaying discovered and manually created links, including filtering |
Topological Management Alerts : | For discovered and manually added links in Topological View, different color and flashing styles are used when: |
| - Monitor data on the links are above User-defined interface Utilization for TX and for RX |
| - Monitor data on the links are above User-defined Packet Loss for TX and for RX |
Event Monitoring : | SNMP trap reception with defined trap attribution, severity and descriptions |
Alarm Escalation : | Alarm generation based on pre-defined event definitions |
Alarm/Event Actions : | Pre-defined and user defined actions triggered by events and alarms |
| Support for alerts via email with SMTP configuration |
Monitor Data : | Device details |
| Port details |
Real-time Key Performance Metrics Collection : | Temperature, Memory utilization, CPU Utilization, Total Inbound SNMP Traps, TCP Connection Attempt Failures, UDP Inbound Errors, Outbound IP Discards, Disk Temperature, Inbound IP Discards, Inbound TCP Errors, Disk Space Used, Inbound IP Address Errors, Disk Space Utilization, Total Disk Space, Inbound IP Header Errors, Total IP Discards, Fan Speed, Outbound IP No Route Discards, Uptime, Inbound ICMP Errors, Inbound ICMP Echo Requests, Total Outbound SNMP Traps, Outbound ICMP Echo Replies, Inbound UDP No Port, Established TCP Connections, Total SNMP Traps |
Active Monitoring with Trending : | Device, port, interface monitoring, historical data persistence, thresholding & graphing (30 days max) |
Flow Collection Server : | Using packet sampling, sampled flow (sFlow) lets you monitor managed switches in high-speed switched networks |
Reports : | Device inventory, device availability, port status, interface status reports, firmware |
CONFIGURATION : | |
Configuration File Backup : | Device configuration file backup for applicable devices |
| 1:1 and 1:Many based on static or dynamic device groups |
| Immediately or scheduled |
Mass-configuration : | Text-based configuration files can be edited and promoted as “Master” configuration files |
| Master configuration files are available for mass deployment |
| This is a useful way to make a “pattern” configuration file to deploy to several devices at once |
| Variables such as IP address or other identifiers can be excluded from mass-configuration |
Configuration File Restoration : | Device configuration file restoration for applicable devices |
| 1:1 and 1:Many based on static or dynamic device groups |
| Immediately or scheduled |
Device Firmware Update : | Automated deployment of selected version of firmware, immediately or scheduled |
Firmware Pre-load Configuration : | Firmware versions may be pre-loaded into the application |
File Comparison : | Color-coded, line-adjusted text comparison of two selected devices or stored files |
Device configuration : | Direct access/cut-through (HTTP/Telnet) |
Built-in File Server : | Support TFTP protocol |
CONFIGURATION (ALL SNMP DEVICES) : | |
MIB Browser : | The SNMP MIB browser lets you retrieve information about SNMP-enabled devices directly |
| The application supports SNMPv1, SNMPv2c, and SNMPv3 and all supported standard and private MIBs |
| The SNMP MIB browser lets you select one of several MIB databases (such as RFC Standard MIBs or NETGEAR Private MIBs) and navigate a MIB tree to select a specific MIB object |
| You can also search for a MIB object, upload MIBs to the MIB browser, and delete MIBs from the MIB browser |
| The application displays the data that the MIB object collects, information about the selected MIB object, and information about the SNMP credentials |
SNMP Commands : | Get: Collects data based on the selected MIB object |
| Get Next: Collects data based on the next MIB object (relative to the selected MIB object) in the MIB tree |
| Set: Changes the value of the selected MIB object |
| Table View: Collects table data based on the selected MIB object (available only for table-related MIB objects) |
SUPPORTED NETGEAR DEVICES : | |
Managed Switches – M4100 series : | M4100-D10-POE Managed Switch Layer 2+ With Static L3 Routing (FSM5210P v1h1) |
| M4100-26-POE Managed Switch Layer 2+ With Static L3 Routing (FSM7226P v1h1) |
| M4100-50-POE Managed Switch Layer 2+ With Static L3 Routing (FSM7250P v1h1) |
| M4100-D12G Managed Switch Layer 2+ With Static L3 Routing (GSM5212 v1h1) |
| M4100-D12G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM5212P v1h2) |
| M4100-12GF Managed Switch Layer 2+ With Static L3 Routing (GSM7212F v1h2) |
| M4100-12G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM7212P v1h2) |
| M4100-26G Managed Switch Layer 2+ With Static L3 Routing (GSM7224 v2h2) |
| M4100-50G Managed Switch Layer 2+ With Static L3 Routing (GSM7248 v2h2) |
| M4100-26G-POE Managed Switch Layer 2+ With Static L3 Routing (GSM7226LP v1h1) |
| M4100-24G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM7224P v1h2) |
| M4100-50G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM7248P v1h1) |
Managed Switches – M5300 series : | M5300-28G Managed Switch Layer 2+ With Static L3 Routing (GSM7228S v1h1) |
| M5300-52G Managed Switch Layer 2+ With Static L3 Routing (GSM7252S v1h1) |
| M5300-28G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM7228PS v1h2) |
| M5300-52G-POE+ Managed Switch Layer 2+ With Static L3 Routing (GSM7252PS v1h2) |
| M5300-28GF3 Managed Switch Layer 3 With Dynamic Routing (GSM7328FS v2h1) |
| M5300-28G3 Managed Switch Layer 3 With Dynamic Routing (GSM7328S v2h2) |
| M5300-52G3 Managed Switch Layer 3 With Dynamic Routing (GSM7352S v2h2) |
Managed Switches – M6100 series : | M6100-44GF3 Chassis Switch Starter Kit (XCM8903SF) |
| M6100-44G3-POE+ Chassis Switch Starter Kit (XCM8903SK) |
| M6100-24X3 Chassis Starter Kit (XCM8903SX) |
| XCM8924X 24-port RJ45 10GBASE-T 16-port shared SFP+ 1G/10G Blade |
| XCM8944 40-port RJ45 10/100/1000 2-port RJ45 10GBASE-T 2-port SFP+ 1G/10G Blade |
| XCM8944F 40-port SFP 100/1000 2-port RJ45 10GBASE-T 2-port SFP+ 1G/10G Blade |
| XCM8948 48-port RJ45 10/100/1000 Blade |
| XCM89P Daughter Card PoE+ 802.3at for XCM8948 and XCM8944 blades |
| XCM89UP Daughter Card UPOE for XCM8948 and XCM8944 blades |
Managed Switches – M7100 series : | M7100-24X Managed Switch Layer 2+ With Static L3 Routing (XSM7224 v1h1) |
Managed Switches – M7300 series : | M7300-24XF XSM7224S Managed Switch Layer 2+ With Static L3 Routing (XSM7224S v1h1) |
Managed Switches – legacy : | JGSM7224 Managed Switch Layer 2 (JGSM7224 v2h1) |
| FSM726 Managed Switch Layer 2 (FSM726 v3) |
| GSM7224 Managed Switch Layer 2+ With Static L3 Routing (GSM7224 v2h1) |
| GSM7248 Managed Switch Layer 2+ With Static L3 Routing (GSM7248 v2h1) |
| GSM5212P Managed Switch Layer 2+ With Static L3 Routing (GSM5212P v1h1) |
| GSM7212F Managed Switch Layer 2+ With Static L3 Routing (GSM7212F v1h1) |
| GSM7212P Managed Switch Layer 2+ With Static L3 Routing (GSM7212P v1h1) |
| GSM7224P Managed Switch Layer 2+ With Static L3 Routing (GSM7224P v1h1) |
| GSM7228PS Managed Switch Layer 2+ With Static L3 Routing (GSM7228PS v1h2) |
| GSM7252PS Managed Switch Layer 2+ With Static L3 Routing (GSM7252PS v1h2) |
| GSM7328FS Managed Switch Layer 3 With Dynamic Routing (GSM7328FS v1h1) |
| GSM7328S Managed Switch Layer 3 With Dynamic Routing (GSM7328S v2h1) |
| GSM7352S Managed Switch Layer 3 With Dynamic Routing (GSM7352S v2h1) |
Smart Switches - standalone : | FS526Tv2 Smart Switch |
| FS726Tv2 Smart Switch |
| FS728TLP Smart Switch |
| FS728TPv2 Smart Switch |
| FS728TP-200 Smart Switch |
| GS108T-200 Smart Switch |
| GS110TP Smart Switch |
| GS510TP Smart Switch |
| GS516TP Smart Switch |
| GS724T-400 Smart Switch |
| GS716T-300 Smart Switch |
| GS748T-500 Smart Switch |
| GS728TP Smart Switch |
| GS728TPP Smart Switch |
| GS748T-400 Smart Switch |
| GS752TP Smart Switch |
| XS712T Smart Switch |
| XS728T Smart Switch |
Smart Switches - stackable : | GS728TPS Smart Switch |
| GS728TS Smart Switch |
| GS752TPS Smart Switch |
| GS752TS Smart Switch |
| GS728TXS Smart Switch |
| GS752TXS Smart Switch |
| S3300-28X Smart Switch (GS728TX) |
| S3300-28X-PoE+ Smart Switch (GS728TXP) |
| S3300-52X Smart Switch (GS752TX) |
| S3300-52X-PoE+ Smart Switch (GS752TXP) |
Wireless Products : | WC7520 Wireless Controller |
| WC7600 Wireless Controller |
| WC9500 Wireless Controller |
| WMS5316 Wireless Management System |
| WAC720 Access Point |
| WAC730 Access Point |
| WG103 Access Point |
| WN203 Access Point |
| WN203-200 Access Point |
| WN370 Access Point |
| WNAP210 Access Point |
| WNAP320 Access Point |
| WNAP370 Access Point |
| WND930 Access Point |
| WNDAP350 Access Point |
| WNDAP360 Access Point |
| WNDAP380R Access Point |
| WNDAP380Rv2 Access Point |
| WNDAP620 Access Point |
| WNDAP660 Access Point |
Security Products : | FVS318G ProSafe Firewall |
| FVS318N ProSafe Firewall |
| FVS336Gv2 ProSafe Firewall |
| FVS336Gv3 ProSafe Firewall |
| SRX5308 ProSafe Firewall |
Storage Products : | RD5200 ReadyDATA |
| RDD516 ReadyDATA |
| RN716X ReadyNAS |
| RN2120 ReadyNAS |
| RN3130 ReadyNAS (all models) |
| RN3220 ReadyNAS |
| RN4220 ReadyNAS |
| RN31200 ReadyNAS (all models) |
| RN31400 ReadyNAS (all models) |
| RN31600 ReadyNAS (all models) |
| RN51600 ReadyNAS (all models) |
SUPPORT ENTITLEMENT : | |
Technical Support : | Basic technical support within 90 days from the date of NMS300 License purchase |
| Basic technical support within 90 days from the date of supported NETGEAR devices purchase |
| Basic and Advanced technical support when NETGEAR Managed devices are covered by the ProSupport OnCall 24x7 service contract (PMB) |
| Basic and Advanced technical support when NETGEAR Managed devices are NETGEAR Managed switches covered by Lifetime Technical Support |
Current NMS300 version : | NETGEAR PROSAFE NETWORK MANAGEMENT SYSTEM NMS300 V1.5.0.11 |
Procurement : | Download fully functional version of NMS300 software here:www.netgear.com/nms300 |
| Comes with complimentary 200-device license pack |
| Managed Access Points under NETGEAR Wireless Controllers don't count as "devices" |
Upgrades : | Free NMS300 v1.x minor upgrades included |
Additional Device License Packs : | NMS300L2-10000S (200-additional device license pack) |
| Electronic license: key is delivered by email |
| License key is registered in ADMIN \ LICENSE MANAGEMENT section of NMS300 Web GUI |
| First NMS300L2-10000S license key will add 200 devices to NMS300 counter (new maximum allowed: 400 devices) |
| Each new NMS300L2-10000S license key will increment NMS300 counter by 200 devices |